Water Mist System

A complete FM approved water mist solution for data centre that effectively substitutes both traditional sprinkler and gas suppression systems

Low Pressure - FM approved for machinery space

DATA CENTRE - Low Pressure Cylinder System

APPLICATION

Industrial facilities and high hazard machinery spaces such as Electrical Rooms, Generator, Combustion turbines, Transformer vaults, Fuel filters, Oil tanks, Biomass storage areas, Lubrication skids, Conveyor belts etc.

ADVANTAGE

    • Modular standalone low pressure water mist system for total flooding protection of machinery spaces, special hazard machinery spaces, combustion turbines and insulated combustion turbines with volumes up to 4610 m3 (162800 ft3) and ceiling heights up to 12 m (39.37 ft ceiling height). The system has been successfully tested and approved according to FM5560.
    • Operates at a pressure between 2 – 16 bar and consists of water cylinders and a nitrogen cylinder that are interconnected
    • It takes up small footprint to house the cylinders aiding to better packaging with the canopy enclosure.
    • Components are more robust for lower pressure operation system

Data CENTRE - High Pressure Cylinder System

APPLICATION

Industrial facilities and high hazard machinery spaces such as Electrical Rooms, Generator, Combustion turbines, Transformer vaults, Fuel filters, Oil tanks, Biomass storage areas, Lubrication skids, Conveyor belts etc.

ADVANTAGE

    • Modular standalone high pressure water mist system for total flooding protection of machinery spaces, special hazard machinery spaces, combustion turbines and insulated combustion turbines with volumes not exceeding 9175 ft3 (260 m3) and a maximum ceiling height of 16.4 ft (5 m).The system has been successfully tested and approved according to FM5560.
    • Ideal for busy areas, since the oxygen displacement is carried out at the source of the fire, not in the protected area.
    • Very minimal footprint needed to house the Water & Nitrogen cylinder aiding to better packaging with the canopy enclosure.
    • As a high-pressure system, Stainless Steel tubing are used which are smaller & easier for installation works